I take only partial credit for cleaning up how things are phrased in the G4 section. Otherwise I did not write or come up with these. They do work however cuz I have used them. If you kill or ''brick'' your device its cu you didn't follow directions. Don't blame me or ppcwarez or the original authors. These are tried and true and DO Work!
Follow THESE Steps EXACTLY.
To learn how to do this for HTC Wizards specifically then follow this procedure to find out if you have a G3 or a G4:
Then if you have a G3 you can do the following. All downloads needed for this process are provided at the end of this post.First determine if you got a G3 or a G4 device. When you turn on your device from can can see you're IPL and SPL version on the screen. If you got IPL/SPL 1.xx or 2.xx you've got a G3 device. If the IPL/SPL shows 2.xx.xxx1 you've got a G4.
For G4 devices however You can flash it without truly unlocking it:(1) Download The Following at the bottom of this Post:
1. Button Rom
2. Lokiwiz
3. T-Mobile 2.26 Rom
(2) Make sure your Wizard is connected through Activesync to your PC and run the Button Rom (unrar and run the updater) go through the entire process.
(3) Once this is completed Extract Lokiwiz to the root of you COMPUTERS' drive.
(4) Open Activesync WITH YOUR DEVICE NOT CONNECTED! and delete your partnership.
(5) Connect your device and cancel the partnership.
(6) Now goto where you extracted lokiwiz to and copy enablerapi.cab to your device.
(7) Now pick up your wizard and run the enablerapi.cab. Let it finish.
(8) Go back to your PC and open command prompt and type ''CD\'' without the quotes. Then type ''lokiwiz.bat'' without quotes. Then when you are able to choose option ''U''. Your device will reboot upon completion.
(9) After its finished rebooting rerun lokiwaiz.bat in command prompt and choose option ''C''. Again your device will reboot.
(10)Watch the rebooting of your PDA, if BOTH IPL and SPL are 1.xx then great. Quite probably your IPL will be 1.xx and your SPL will be 2.xx. Rerun the button 1.05 ROM downgrade a second time and it will become 1.x on both IPL and SPL. You don't need to redo the unlocking.
(11)Now install the T-Mobile 2.26 rom.
After that's done say hello to your CID and SIM unlocked Wizard. You may now flash any rom you want
Downloads for G3:(1) Download Shelltool (Download link at bottom) and extract it.
(2) You should disable any antivirus and firewall,as well as close all active applications on your desktop.
(3) Download ROM what you want to flash to your device. Might I suggest the one I refered to earlier in this post.
(4) Look in the rom file and extract the nk.nbf to the ShellTool directory.
(5) Connect your device to ActiveSync, then copy Cert_SPCS.cab and EnableRapi.cab and run them. Wait a few moments after those are done and reboot your device.
(6) After Reboot go ahead and access connection manager and shut off all communication. This means all items should be grayed out or have an x on them.
(7) go back to your computer and run ShellTool.
(8) Click Get ROM info. After that you will see some information about the rom and what this ROM includes.
(9) Click ?Extract OS? and wait for a bit. You will get ?Done!? as a message when os is finished extracting.
(10)Click on ?Flash OS?.
(11)Read all the information on the popup and follow instructions.
(12)Verify your device is connected through activesync.
(13)After that click ?OK?. ShellTool will start to flash your device. You won?t see any percents of progress and your device won?t be in bootloadermode.
PlEASE!!! DON?T TOUCH YOUR PC OR DEVICE. YOU SHOULD WAIT ABOUT 15 MIN WHILE PROCESS IS FINISHED!!!
When your device is flashed you will get a message about it! ?[your time] Write ROM 80040000-OS.nb End?
(14) ONLY AFTER ?END? MESSAGE should you DISCONNECT YOUR DEVICE AND MAKE a HARD RESET!!! THIS IS VERY IMPORTANT!!!
* 1 - Holding "Voice Dial" + "Wireless Manager" while short pressing the "reset" button
* 2 - Hold the 2 buttons until you see the screen telling you to press send button to hard reset.
* 3 - Press "send/dial" button to hard reset
********************
If you encounter itsutils error please DONt hard reset and try the following steps:
---1. Disconnect USB cable and reconnect again
---2. Wait until activesync is fully connected
---3. Setup EnableRapi.cab again and reboot
---5. Run ShellTool again and folow the steps
Button ROM
Kód: Vybrat vše
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
Kód: Vybrat vše
http://rapidshare.com/files/28869512/attachment.php_attachmentid_25702_d_1135865869
Kód: Vybrat vše
http://rapidshare.com/files/28877893/RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe
Shelltool
Kód: Vybrat vše
http://rapidshare.com/files/28888121/ShellTool.rar
převzato z:
Kód: Vybrat vše
ppcwarez.org
Kdo by chtěl, můžu to přeložit PC Translatorem do ČJ...